It’s happened to all of us. You spill a glass of water or drop your phone in a puddle and water gets into the camera.
Moisture in a phone camera can cause a lot of damage in a short period. Aside from reducing the quality of your phone camera images, it can heavily damage the lens system.
However, there are steps you can take to get the moisture out of your phone camera that will help you save both your images and your phone camera’s functionality.
Here are some tips on how to get the moisture out so that you can take clear pictures again.
Table of Contents
- 1 Use Silica Gel Packets
- 2 Put It in an Airtight Bag Containing Uncooked Rice
- 3 Put It in Sunlight
- 4 Clean It With a Microfiber Cloth
- 5 How To Protect Your Phone From Water Damage
- 6 FAQs
- 7 Final Thoughts
Use Silica Gel Packets
The easiest way to get the moisture out of your phone camera is by using dry sodium silicate gel packs. These are known as silica gel packs or desiccant packs and can be bought at most hardware stores for around $10-$20.
Put the pack in a sealed plastic bag with your phone disassembled, cleaned, and free of any visible moisture. Now put the bag in a fairly warm area for up to 24 hours.
Eventually, most of the moisture you couldn’t reach will get sucked out of your phone camera and get absorbed by the silica gels. Then, you can simply wipe the phone again with a dry cloth.
Put It in an Airtight Bag Containing Uncooked Rice
Another effective way to get the moisture out of your phone camera is by putting it in a bag containing dry or uncooked rice. As with using silica gel packs, put the phone and the bag of rice in a fairly warm place for several hours. The rice will absorb all of the water from your phone’s delicate components.
Once all of the moisture has been absorbed by the rice, turn your phone back on to make sure it’s working correctly. If everything seems to be in order, you can simply wipe off any residual moisture from your screen and camera lens.
Put It in Sunlight
You can also use direct sunlight to dry out your phone. Just leave it in the sun for several hours, then turn it on to see if the moisture has evaporated.
As with using rice or silica gel packs, you’ll want to wipe down any residual water that may be left on your screen and camera lens after your phone is dry.
Clean It With a Microfiber Cloth
You can use a microfiber cloth to wipe down your phone and remove any moisture that might be left on the camera lens. A microfiber cloth is made of extremely tiny fibers that are very soft, which makes it less likely that you’ll cause any scratches or marks on the lens.
To clean your phone’s lens without getting moisture under the screen, you’ll need to use a separate cloth or tissue for the lens and then another one for the screen.
Some people might suggest using a hairdryer to help get the moisture out of your phone camera, but this is rarely effective at best and could be more dangerous for your phone at worst. Water might be forced further into the phone and the high heat produced by the blow-dryer can damage your phone’s circuitry and components.
It could also cause water blisters on your screen that will make your phone difficult to use.
How To Protect Your Phone From Water Damage
Here are some common solutions on how to best protect your phone from future water damage:
- Don’t take your phone to the beach, pool, or bathtub.
- Don’t use it in the rain.
- Keep it away from glasses and other containers of liquid.
- If you do get moisture in your phone, don’t try to turn it on or plug it into a charger. This could cause parts of your phone to short out and ruin the device beyond repair.
- Remove any memory card from your phone before drying it with the rice method. If the card gets wet, you’ll run the risk of permanently losing any information on it.
- Check reputable websites for tips on how to prevent your specific phone model from leaking or breaking down when exposed to water.
How Do You Defog a Phone Camera Lens?
Use a microfiber cloth or tissue to wipe off any residual water from the lens. You can also use direct sunlight or put your phone in a bag of rice for several hours to absorb some of the moisture.
How Do You Fix a Blurry Front Camera on an Android?
If your photos and videos seem hazy or the camera appears blurry, try cleaning the camera lens. If your phone has a laser sensor, also clean the sensor.
If these don’t fix the problem, then it might be a software issue. To fix your Android’s front camera, you can try backing up and then restoring the phone’s data. This might work with some phones, especially if you’re experiencing blurry photos on one specific app.
If your front camera is still blurry after restoring your data, you may need to do a factory reset of your device. Make sure to back up any information you don’t want to lose before doing this.
Why Is My Phone’s Front Camera Blurry?
There are a few reasons why your front camera might be blurry. If you’re taking photos outside in bright sunlight, the sensor could be overwhelmed with light, and this could make things appear out of focus. You can try turning on HDR mode or adjusting the exposure level to see if that helps. In some cases, it’s also possible to adjust the camera’s focus manually.
Knowing how to get the moisture out of your phone camera will help make sure you can keep on using it even if it’s exposed to water.
If none of the methods we’ve mentioned above work, take your phone to a professional repair shop, especially if you dropped it in saltwater or another corrosive liquid.
If you’re looking for an underwater camera, check out the Best Underwater Camera For Snorkeling, or if you’re in need of a quick guide on how to set up a camera on a tripod, read How to Put a Camera on a Tripod?